Three-zone Continuous Washing Machines for Wheel Hub Parts after De-flashing &
Polishing
Specification:
Object to be cleaned:
Contamination:
Component size:
Maximum chain load:
Throughput:
Movement:
Cleaning agents:
Cleaning cycles:
Washing processes:
Special equipment:
Heating:
Installation area:
Ball hubs, ball retainers and external rings after de-flashing & polishing
Remnants from polishing, shavings and dirt from movement
Ø = roughly 45.0 – 85.0 mm , height = roughly 21.5 – 48.0 mm
60 kg / meter
200 kg / hour
Wire-eyelet linked belt with two conveyor tracks
Water-based cleaning agent & demineralized water
Spray wash, spray rinse & circulated air dry
Backflow filter, full flow filtration & degreasing
Rotary table storage at the exit and a work platform for polishing
Electrical
L x W x H of 7,000 x 2,900 x 2,900 mm
TPS - Industriewaschmaschinen- und Anlagenbau GmbH - Alversdorfer Weg 1 - 38364 Schöningen - Germany - Telefon: 00495352/96820-10 - Fax: 00495352/96820-29
Copyright 1998 - 2024 ALL RIGHTS RESERVED